What's new
Steroid Source Talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts.

Is injecting into a Vein a real risk

danny6594

New member
Joined
Mar 31, 2018
Messages
23
Reaction score
0
I never aspirate because air bubbles come and when you do and I feel like I’m better off not doing it at all, i use a 5/8 inch needle. Is accidentally injecting into a vein a real concern
 
Last edited:

demondark

New member
Joined
Sep 9, 2019
Messages
45
Reaction score
0
What type of syringe is it? How hard do you pull back when you aspirate? And what are your injection sites?
 
Last edited:

Fina-express14

New member
Joined
Feb 18, 2018
Messages
152
Reaction score
0
I don’t get why taking 2 seconds to aspirate is a big deal for some people.
Just do it anyway. If you somehow manage to bullseye a vein you will get a flash with minimal effort pulling wise on the plunger.
Don’t know how one could be better off without it when it takes next to nothing effort wise to do.

That being said it’s been over 3 years for me and not Once have I managed to square up a vein
Directly . I have however gone through some capillaries resulting in blood coming into the barrel
About the same size as the air bubbles you see . Which when using compounds like tren is nice. That way I know I at least have a chance at avoiding tren cough if I try again in a diff area.

Just my .02
 
Last edited:

demondark

New member
Joined
Sep 9, 2019
Messages
45
Reaction score
0
Definitely agree, shouldn’t be pulling hard enough to get bubbles, slight negative pressure will show blood if you hit it.
Fina-express14" pid='68099' dateline='1568167504:
I don’t get why taking 2 seconds to aspirate is a big deal for some people.
Just do it anyway. If you somehow manage to bullseye a vein you will get a flash with minimal effort pulling wise on the plunger.
Don’t know how one could be better off without it when it takes next to nothing effort wise to do.

That being said it’s been over 3 years for me and not Once have I managed to square up a vein
Directly . I have however gone through some capillaries resulting in blood coming into the barrel
About the same size as the air bubbles you see . Which when using compounds like tren is nice. That way I know I at least have a chance at avoiding tren cough if I try again in a diff area.

Just my .02
 
Last edited:

arkhoss

New member
Joined
Aug 22, 2019
Messages
6
Reaction score
0
i come from a medical background and yes if you get it in a vein then you are pumping oil into your blood then it does not mix and acts as an embolus like if you get air in your vein. An embolus is a foreign object in the blood that can stop at a fortification and stop blood flow or go to the brain and cause a stroke.
 
Last edited:

MentalPariah

New member
Joined
Aug 25, 2018
Messages
115
Reaction score
1
I’ve popped a vein 1 time and let me tell you I knew it immediately!!! Within about 2 seconds It felt like i snorted the oil and alcohol from swabbing. It took my breath away and I could smell and taste it very strongly. When I took the needle out after the panic attack it sprayed blood everywhere…fucking brutal lol.
It’s only happened once but it was an Interesting experience nonetheless.
 
Last edited:

dexes

New member
Joined
Sep 2, 2018
Messages
285
Reaction score
0
I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
 
Last edited:

thallandchill

New member
Joined
Jul 28, 2018
Messages
404
Reaction score
3
dexes" pid='68111' dateline='1568171731:
I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?

I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.

I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
 
Last edited:

AnonymityismyRemedy

New member
Joined
Feb 27, 2018
Messages
29
Reaction score
3
thallandchill" pid='68136' dateline='1568208551:
dexes" pid='68111' dateline='1568171731:
I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?

I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.

I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
For example:
3ml syringe. 1ml injection.
Pull 1.5ml worth of air into syringe. Insert into vial. Push 1ml air into vial. Draw 1ml oil. Air should be on plunger side of syringe. Pin and allow some of the bubble to follow through. Makes unmistakable noise once all the oil is gone and you’re pushing air. You only need to push as much air to purge the last bit of oil not the entire bubble. Harmless.
 
Last edited:

dexes

New member
Joined
Sep 2, 2018
Messages
285
Reaction score
0
thallandchill" pid='68136' dateline='1568208551:
dexes" pid='68111' dateline='1568171731:
I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?

I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.

I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
When you load the gear pull o.1cc air. When the pin is in at 90 degree angle tilt the syringe a tiny bit upward and the bubble goes to the back of the syringe. Then slowly inject and at the end of the injection the last bit of gear goes in. Ive read it can reduce pip. Anecdotally with DHB or no esters I agree.
 
Last edited:

thallandchill

New member
Joined
Jul 28, 2018
Messages
404
Reaction score
3
dexes" pid='68149' dateline='1568221670:
thallandchill" pid='68136' dateline='1568208551:
dexes" pid='68111' dateline='1568171731:
I never aspirate, I feel I do my injections properly and in the right place on the site. I never do the quads. Delts, vg, lats and if someone can do my injection like my girl rear delts and glute. I also inject .1cc of air every time to get all the oil out and reduce any pip, specifically from no esters or dhb.
This is probably a dumbass question, and I’ve been using gear for awhile now, but how the fuck do you manage to get an air bubble behind the gear in the syringe to push everything out?

I’ve always just chalked up the .5ml I lose every injection but it adds up over time, especially with how long I’ve been using shit.

I saw someone else talk about it, I think it was SoCo who said he does the same thing and now I’m fucking curious about how to do it.
When you load the gear pull o.1cc air. When the pin is in at 90 degree angle tilt the syringe a tiny bit upward and the bubble goes to the back of the syringe. Then slowly inject and at the end of the injection the last bit of gear goes in. Ive read it can reduce pip. Anecdotally with DHB or no esters I agree.
I’ll have to try it. I’m more thinking about not losing out any gear more than pip personally.
 
Last edited:

Masterofron

New member
Joined
Apr 2, 2018
Messages
1,012
Reaction score
3
I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
 
Last edited:

dexes

New member
Joined
Sep 2, 2018
Messages
285
Reaction score
0
Masterofron" pid='68154' dateline='1568223543:
I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
Rich Piana said he never used an alcohol swab in 25 years haha
 
Last edited:

thallandchill

New member
Joined
Jul 28, 2018
Messages
404
Reaction score
3
Masterofron" pid='68154' dateline='1568223543:
I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
Hey, I haven’t used any in years either! But I don’t aspirate. I like to live dangerously.
 
Last edited:

dexes

New member
Joined
Sep 2, 2018
Messages
285
Reaction score
0
thallandchill" pid='68184' dateline='1568232052:
Masterofron" pid='68154' dateline='1568223543:
I mean with Insulin pins I can’t aspirate so I take my chances, but it’s easier to tell where you are inside the muscle since it’s less deep. You’ll know if it’s a vein/artery very quickly lol. With 3ml syringes I always aspirate. There’s been a handful of times I’ve pulled the syringe back just a tad bit and it’s filled up with blood, meaning I was inside of a vein and had no idea. It takes 1 second to aspirate and there’s no reason you shouldn’t do it, just to be safe. It’s probably a better practice than using alcohol pads lmao. I haven’t used an alcohol pad in years…
Hey, I haven’t used any in years either! But I don’t aspirate. I like to live dangerously.
Not sure if I’d blow up the gym toilet and pin the glute though…
 
Last edited:
Top