What's new
Steroid Source Talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts.

Please Dont Slam Me. Very new to the idea of brewing.

Hdusty81

New member
Joined
Sep 8, 2022
Messages
1
Reaction score
0
So I found my sources and everything needed but I'm at this little standstill of not know whether I can find a micron filter pump that I can get strictly for 10ml. Is there one that I can manually pump/set the amount? Or am I just going off eye or looks? I've been in juice for years and just tired of running out of Test E and having to get multiple packs in every month as I have a lot of friends who are TRT. Figured it's better to just make a bundle that I could store for a year and not have issues in ordering and dealing with packages.
 

JamesDoe350

Active member
Joined
Sep 5, 2022
Messages
439
Reaction score
182
im not sure the best answer to your question. Most ppl start out with a hand pump, but then trying to filter 100-200ml of oil will fuck you up. They swap to a caulk gun, unless they are big time. you have different options on filtering. some ppl filter through the syringes before the pump into the vial, wouldnt really recommend vs double filtering. MesoRx has a great post on homebrewing and will answer every question you have. When you start to filter, the first some of vials will filter okay, then when you start to push harder, just change the filter or else you might bust it and have to start all over again.

i hope this helps.
 

Thrasymachus

Active member
Joined
Sep 9, 2022
Messages
199
Reaction score
132
Anyone doing just 10 to 20ml filtering should just use syringe filters. First with a 0.45 and then a 0.22 micron filter with smaller syringes like 5ml that make it easier to push the oil through the filter. If you use really large syringes like 35ml or bigger you're gonna be forcing oil against the side walls of the syringe which gets really old after about 30 minutes.

Pre-wet the syringe filters with oil without hormone to keep from wasting a few mls of oil containing hormone.

Brewing 200ml at a go is a rookie mistake as few will ever use that much oil unless you're going ballsout.

Typically you make up a batch of say 25ml, you'll lose a couple of ml in the process and you're done.
 

JamesDoe350

Active member
Joined
Sep 5, 2022
Messages
439
Reaction score
182
my 100-200 was only have example :)

thanks for the pre-wet idea though!
 
Top