What's new
Steroid Source Talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts.

Raw powder question.

Sms7829

Member
Joined
Nov 4, 2022
Messages
72
Reaction score
41
So forgive my ignorance but I’m totally a newb when it comes to home brewing. So if I were to get raw powder say for anavar or any other oral, does anything have to be done to that powder besides properly measuring and filling it into capsules?
 

Nandrolorian

Active member
Joined
Jul 28, 2022
Messages
193
Reaction score
118
Not trying to be mean here man but a little effort goes a long way. I got to this in about 10 seconds.

r/steroids wiki.

Trituration Method (Capsules)
Guide from The Pharmaceutics and
Compounding Laboratory at UNC
Mixing The Powder
Things you'll need: Milligram scale, small
scoop, mortar & pestle, math
1. Fill one capsule with your active ingredient
weigh on the milligram scale. record weight
2. Fill one capsule with your filler. weigh on the
milligram scale. record weight
3. Find your ratio of active ingredient/filler
(asin/creatine) using the formula -(Desired
active dose x total filler)/total active-. This
will give you how much space your active
ingredient takes up out of a full capsule of your
filler. I will use aromasin and creatine as an
example. (THESE ARE EXAMPLE CAPACITIES,
WEIGH YOUR OWN) One size 1 capsule holds
300mg asin, and 340mg creatine. To find out
how much creatine to take out to account for
12.5mg of asin you follow the formula. (12.5 x
340)/300 = 14.166. 12.5mg of aromasin takes
up the same amount of space as 14.166mg
of creatine. You will be filing one capsule
with 12.5mg asin, 325.8mg creatine. Multiply
to meet your capsule requirements. So for
100 caps you would need 1.25g asin, 32.58g
creatine.
4. Place your active ingredient in the mortar
and pestle. 1.25g of aromasin. (This is
where we use geometric dilution to achieve a
thorough blend.)
5. Weigh out 1.25g of creatine, place in the
mortar, and mix
6. Weigh out 2.5g of creatine, place in mortar,
and mix.
7. Weigh out 5g of creatine, place in mortar, and
mix.
8. Repeat until desired quantity of powder is
achieved.
9. Begin capping process with your newly
mixed powder.
 
Top