What's new
Steroid Source Talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts.

Slin pins for IM injection

JC2424366

New member
Joined
Feb 18, 2018
Messages
20
Reaction score
0
Wanted to see if anybody could give me any feedback on using 29 ga 1/2 in pins instead of something like a 25 gauge 1 in. My only concern is it not going deep enough. Would this work for anything under 1 ml if the site is lean enough? Seems to be conflicting info out there about it.
 
Last edited:

ryan

New member
Joined
Feb 18, 2018
Messages
109
Reaction score
0
JC2424366" pid='387' dateline='1519164662:
Wanted to see if anybody could give me any feedback on using 29 ga 1/2 in pins instead of something like a 25 gauge 1 in. My only concern is it not going deep enough. Would this work for anything under 1 ml if the site is lean enough? Seems to be conflicting info out there about it.
Where are you pinning it? If your lean enough, it should work everywhere except maybe glutes. It’ll just be slow to pin because of the gauge.
 
Last edited:

JC2424366

New member
Joined
Feb 18, 2018
Messages
20
Reaction score
0
Going to pin quads and also try delts for the first time. Will save the 25 ga for ventro glute.
 
Last edited:
S

system

Guest
I currently use a 29g 1/2" slin pin for delts bis and tris. Totally fine. 27g 1 1/4" for glutes (not a slin pin tho).

It’s totally plausible. Obviously the length would depend on how lean you are, and how well it flows through that small of a gauge will be determined by the type of carrier oil/it’s viscosity. I use MCT and GSO through it fine.
 

Oakcity

New member
Joined
Feb 18, 2018
Messages
83
Reaction score
0
Yep I use 27g 1/2 for delts pecs and quads
 
Last edited:

trenbolgona

New member
Joined
Feb 18, 2018
Messages
325
Reaction score
0
Been using 30g 1/2 backloaded ventrogluteal, lats, chest, delts.
Still can do glute with a 1/2in but the slin pins are normally 1ml and I reserve glutes for more volume injects normally.

Just don’t be fat lol.
 
Last edited:

JC2424366

New member
Joined
Feb 18, 2018
Messages
20
Reaction score
0
Lol alright thanks. Can you preload pins for a few days or is it best to load and use them immediately? This will be my first time pinning ED
 
Last edited:

mastrblastrr

Member
Joined
Feb 19, 2018
Messages
45
Reaction score
3
In quads I’ve I tried 29g 1/2in slin pins and worked sometimes but if you mess up or if youre fat than it will leak and its a pain… I saw you can get 27g 5/8inch slin pins. That would be better as the oil is kinda thick. 29g its like you have to squeeze that MFer.

I just do 25g 1inch pins in quads on blast and it doesnt hurt and goes in much easy.
 
Last edited:

Superman

New member
Joined
Feb 18, 2018
Messages
25
Reaction score
0
I use them everywhere including glutes.
 
Last edited:

trenbolgona

New member
Joined
Feb 18, 2018
Messages
325
Reaction score
0
JC2424366" pid='421' dateline='1519180443:
Lol alright thanks. Can you preload pins for a few days or is it best to load and use them immediately? This will be my first time pinning ED
Depends on what your oil is brewed in and the material of the stopper in the syringe. If you leave a tiny air pocked at the tip, then leave them needle side down it shouldn’t touch the stopper and shouldn’t harm it.

A couple days I wouldn’t worry about, but a week meh…
 
Last edited:

bennyjean

New member
Joined
Feb 19, 2018
Messages
14
Reaction score
0
I do all delt heads with 3grams a week only now. previously done biceps, triceps, traps, lats, chest. dont really like doing quads or glutes, but when i do i use 1" needle. my favorite is traps, but my ifbb trainer only wants me to do delts now.
 
Last edited:
Top