Test e recipe without BB

[iNeedGains]

Anyone have a recipe for Test e without BB?
Or a vendor that sells test without BB?

After every pin with UGL gear I have some weird sides like DRY mouth, achy joints, slight hair shedding, irritable, insomnia. This all goes away a day or two if I stop pinning so I’m sure it’s something in the gear. I’ve tried different carrier oils, esters, concentrations. I even tried to run nandrolone only thinking it was an adverse reaction to test itself but same results. I’ve done bloods and everything looks fine. E2 is high normal or normal and test levels are around 900 on 150mg test.

Right now I’m on HCG solo until I find a solution. On HCG solo all my previously mentioned sides are gone and I feel so much better.

I’m guessing it’s the BB since it’s a solvent and I’ve developed some sort of intolerance to it after 6 years of BnC.

Thanks

 

[dick_starbuck]

I think even pharma preparations use BB.

The only pharma preparation of any compound I've hear of is Rimobolan amps, since it can be used for infants and infants can react badly to BB. Hence why primo amps hurt like hell.

 

[Hypertrophy]

Testosterone enanthate does not require the use of any solvents ex: benzyl benzoate. The melting point for this compound is significantly low thus allowing the hormone to hold well in the finished solution without issue

 

[Synergy Forge]

Anyone have a recipe for Test e without BB?
Or a vendor that sells test without BB?

After every pin with UGL gear I have some weird sides like DRY mouth, achy joints, slight hair shedding, irritable, insomnia. This all goes away a day or two if I stop pinning so I’m sure it’s something in the gear. I’ve tried different carrier oils, esters, concentrations. I even tried to run nandrolone only thinking it was an adverse reaction to test itself but same results. I’ve done bloods and everything looks fine. E2 is high normal or normal and test levels are around 900 on 150mg test.

Right now I’m on HCG solo until I find a solution. On HCG solo all my previously mentioned sides are gone and I feel so much better.

I’m guessing it’s the BB since it’s a solvent and I’ve developed some sort of intolerance to it after 6 years of BnC.

Thanks

There are 3 compounds that I am aware of that do not require BB, Test E is one of them, yes. It still baffles me to this day that some sources will put additional chemicals in their products without a second thought, despite it being a waste as well as an unneeded hazard. If you want to give it a try before you brew it then you're welcome to hit me up. Hope it helps,

Thank you,
Syn

 

[iNeedGains]

There are 3 compounds that I am aware of that do not require BB, Test E is one of them, yes. It still baffles me to this day that some sources will put additional chemicals in their products without a second thought, despite it being a waste as well as an unneeded hazard. If you want to give it a try before you brew it then you're welcome to hit me up. Hope it helps,

Thank you,
Syn

Thank you for your reply!
So I made a batch without BB and I felt way better but still had some strange symptoms. I made another (small) batch without BA. I used a 0.2um and 0.1um filter and after a week all my symptoms went away. I understand that an antibacterial is necessary but i needed to do this to confirm that it was the benzene’s causing issues.

Do you know if there is another anti bacterial agent that can be used in place of BA in the brew process?

Thank you!!

 

[SHA-Athletics]

There are a hand full of compounding pharmacies that use 3 percent ba only.

To the question above. Even .9-1percent ba will keep you solution sterile. That is the amount I would use if you are sensitive to solvents.

 

[readalot]

You can also get pharma TE with chlorobutanol. Hikma, etc.

Lots of details in this thread:

https://thinksteroids.com/community/threads/primobolan-underrated-for-muscle-gain.134421842/post-3236145