What's new
Steroid Source Talk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts.

Broken lid

Dreadlifts

Member
Joined
Feb 3, 2019
Messages
229
Reaction score
2
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
 
Last edited:

UnclePopHollows

New member
Joined
Jan 4, 2019
Messages
40
Reaction score
0
Dreadlifts" pid='44832' dateline='1552507311:
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.

Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
 
Last edited:

Dreadlifts

Member
Joined
Feb 3, 2019
Messages
229
Reaction score
2
UnclePopHollows" pid='44840' dateline='1552513142:
Dreadlifts" pid='44832' dateline='1552507311:
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.

Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or something
 
Last edited:

UnclePopHollows

New member
Joined
Jan 4, 2019
Messages
40
Reaction score
0
Dreadlifts" pid='44853' dateline='1552515540:
UnclePopHollows" pid='44840' dateline='1552513142:
Dreadlifts" pid='44832' dateline='1552507311:
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.

Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or something
Ah, yea I’ve had that happen before. I’ve always been able to get her to bust loose with a ton of downward pressure though. Good luck to you, bruh. That stuff lets you do some killer cardio.
 
Last edited:

Dreadlifts

Member
Joined
Feb 3, 2019
Messages
229
Reaction score
2
UnclePopHollows" pid='44862' dateline='1552522644:
Dreadlifts" pid='44853' dateline='1552515540:
UnclePopHollows" pid='44840' dateline='1552513142:
Dreadlifts" pid='44832' dateline='1552507311:
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.

Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or something
Ah, yea I’ve had that happen before. I’ve always been able to get her to bust loose with a ton of downward pressure though. Good luck to you, bruh. That stuff lets you do some killer cardio.
Ty
 
Last edited:
Top