Dreadlifts
Member
Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
Last edited:
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or somethingDreadlifts" pid='44832' dateline='1552507311:
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
Ah, yea I’ve had that happen before. I’ve always been able to get her to bust loose with a ton of downward pressure though. Good luck to you, bruh. That stuff lets you do some killer cardio.UnclePopHollows" pid='44840' dateline='1552513142:
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or somethingDreadlifts" pid='44832' dateline='1552507311:
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.
TyDreadlifts" pid='44853' dateline='1552515540:
Ah, yea I’ve had that happen before. I’ve always been able to get her to bust loose with a ton of downward pressure though. Good luck to you, bruh. That stuff lets you do some killer cardio.UnclePopHollows" pid='44840' dateline='1552513142:
It’s a safety dripper. And yes theres a rubber dropper attached. It’s like the plastic around the dropper is stuck “down” and turning it makes a clicking noise. I’m afraid I’ll have to cut it and transfer it to a stevia bottle or somethingDreadlifts" pid='44832' dateline='1552507311:
It sounds dumb, but are you pressing down while turning? Could be a safety dripper.Ok so I have a GW solution in a 30ml bottle, opened it and it was fine, put the lid back on and its stuck on the rings or something-so it wont open. What do?
Is there a rubber dropped attached at the top? You could cut that off, and try and remove the glass dropper once it’s off. Or drill a small hole in the plastic cap and transfer it.