What's new
Steroid Source Talk

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Dissolving oral raws for oral consumption

I got a bunch of raws and don’t really want to cap
It all out. This is for oral steroids like Dbol Adrol Sdrol etc. was thinking of diluting the compounds in DMSO and just dropping on tongue with oral syringe or injecting with slin pin. What have you guys down and/or recommend.
 
Last edited:
Some recipes I’ve had friends use with success.

20ml of Anadrol Oral Liquids @ 50 mg/ml - Requirements:
1 gram of Oxymetholone powder;
8.4 ml of PEG 300;
10.5 ml 190 Proof Grain Alcohol.

50ml of Anavar Oral Liquids @ 20 mg/ml - Requirements:
1 gram of Oxandrolone powder;
9.8 ml of PEG 300;
39.2 ml of 190 Proof Grain Alcohol.

200ml of Anastrozole Oral Liquids @ 5 mg/ml - Requirements:
1 gram of Anastrozole powder;
19.9 ml of PEG 300;
179.1 ml of 190 Proof Grain Alcohol.

20ml of Clomid Oral Liquids @ 50 mg/ml - Requirements:
1 gram of Clomiphene Citrate;
7.6 ml of Glycerol;
11.3 ml of 190 Proof Grain Alcohol.

40ml of Aromasin Oral Liquids @ 25 mg/ml - Requirements:
1 gram of Aromasin Powder;
7.8 ml of PEG 300;
31.2 ml of 190 Proof Grain Alcohol.

20ml of Dianabol Oral Liquids @ 50 mg/ml - Requirements:
1 gram of Methandrostenolone powder;
19 ml of 190 Proof Grain Alcohol.

200ml of Letrozole Oral Liquids @ 5 mg/ml - Requirements:
1 gram of femara powder;
19.9 ml of PEG 300;
179.1 ml of 190 Proof Grain Alcohol.

20ml of Nolvadex Oral Liquids @ 50 mg/ml - Requirements:
1 gram of Tamoxifen Citrate;
19.6 ml of Glycerol;
29.4 ml of 190 Proof Grain Alcohol.

50ml of Nolvadex Oral Liquids @ 20 mg/ml - Requirements:
1 gram of Tamoxifen Citrate;
9.8 ml of PEG 600;
39.2 ml of 190 Proof Grain Alcohol.

20ml of Proviron Oral Liquids @ 50 mg/ml - Requirements:
1 gram of Mesterolone Powder;
8.4 ml of PEG 300;
10.5 ml of 190 Proof Grain Alcohol.

40ml of Winstrol Oral Liquids @ 25 mg/ml - Requirements:
1 gram of Stanozolol Powder;
7.8 ml of PEG 300;
31.2 ml of 190 Proof Grain Alcohol.

For the above conversion requiring PEG and 190 Proof Alcohol, use the following procedure:
  1. place a sufficient amount of water in a pan and place on the stove;
  2. remove from heat when the water reaches boiling temperature;
  3. place the powder and the PEG in the beaker;
  4. immerse the beaker in the pan of water so that the water is level with the top of the contents of the beaker;
  5. gently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary);
  6. remove the beaker from the water;
  7. allow the PEG to cool down;
  8. slowly add the 190 Proof Alcohol to the mixture;
  9. gently stir until fully mixed.
For all of the above conversions where PEG is not required, use the following procedure:
  1. mix powder and 190 Proof Alcohol in the beaker;
  2. gently swirl or stir the contents of the beaker until the solution is clear;
  3. the majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined above;
  4. In the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151;
  5. Flavored oils can also be added to mask the taste if that is your preference.
 
Last edited:

Skipper56

New member
The state I live in doesn’t allow 190 proof anything, I think 150 or 155 is the limit. Would that suffice or anyone have any other suggestions instead of 190 proof grain?
 
Last edited:

Brochacho_Prime

New member
Zeepoochenstein" pid='44130' dateline='1551916399:
Wow thanks dude.

@“MiniFridge”
Dbol and Adrol are amazing if you cook them up into injectables. You can pretty easily do 50mg/50mg blend in Mig.
 
Last edited:

Swole_Guacamole

New member
my word…

I just make oral suspensions using vegetable oil (cheap ass bulk stuff from walmart, you can also use vegetable glycerin)

use steroidcal.com and set benzyl alc and benzyl benzo to 0

Ex.

100ml total of aromasin at 25mg per ML SUSPENSION (NOT A SOLUTION, YOU MUST SHAKE BEFORE YOU DOSE)
2.5 grams aromasin
97.88ml GSO (or other oil)

mix and shake all in one bottle, this will not dissolve, it will only suspend so if you pour it into separate bottles you can fuck up the concentration
 
Last edited:

MattMatt93

New member
Zeepoochenstein" pid='44310' dateline='1552054024:
@“Swole Guacamole”

You use and oral syringe to get the 1ml?
Use a syringe you would pin with, with a detachable needle.Take the needle off, put the syringe in the suspension, pull back on the plunger to the 1ml mark. Works best for me.
 
Last edited:
Zeepoochenstein" pid='44107' dateline='1551902882:
I got a bunch of raws and don’t really want to cap
It all out. This is for oral steroids like Dbol Adrol Sdrol etc. was thinking of diluting the compounds in DMSO and just dropping on tongue with oral syringe or injecting with slin pin. What have you guys down and/or recommend.
Dbol suppository baby
 
Last edited:
Top