Homebrewing when raws came as oils?

[NoChewing]

So, I just wasn’t expecting my EQ raws to come in oil form.

Is there really 10gr of EQ magically fitting in something as small as a 10 ml vial?

I get that if it’s a liquid, I’d basically dilute it, but what is the diluent and how can there really be 1gram per ml dissolved in there?

Help, and opinions please. Searching for ‘homebrew raw oils’ is one of those searches that works poorly in this case.

Thank you.

 

[jbtb2116]

Not 100% sure, but I do believe EQ raws do come in liquid form.

 

[NuclearArmedBarbies]

NoChewing" pid='9452' dateline='1524539772:

So, I just wasn’t expecting my EQ raws to come in oil form.

Is there really 10gr of EQ magically fitting in something as small as a 10 ml vial?

I get that if it’s a liquid, I’d basically dilute it, but what is the diluent and how can there really be 1gram per ml dissolved in there?

Help, and opinions please. Searching for ‘homebrew raw oils’ is one of those searches that works poorly in this case.

Thank you.

EQ as a raw is a liquid, and it’s 1 gram per ML. So yes there is 10 grams in something as small as a ML.

You brew it just as you would other raws, except the need for a solvent isn’t as high. The regular 2/20 would work, so would 2/15 or 2/10 if your concentration is low.

 

[NoChewing]

Thank you.

It seems most sources are going with 300 or 600 mg/ml.

I guess 600 mg/ml? Will it hurt much more than 300mg/ml?

I presume I can just do 2 and 20 then the rest GSO?

Thank you.

-edit- eh- going with 400 mg/ml because the math works out well like that. Thanks all.

 

[NuclearArmedBarbies]

NoChewing" pid='9459' dateline='1524542411:

Thank you.

It seems most sources are going with 300 or 600 mg/ml.

I guess 600 mg/ml? Will it hurt much more than 300mg/ml?

I presume I can just do 2 and 20 then the rest GSO?

Thank you.

The concentration depends on what dose you want to run; anything above 600mg a week I’d opt for a higher concentration brew so that you aren’t pinning mls of gear a week.

If you go above 400mg/ml you’ll probably want to use thinner carrier like MCT, but you can try with GSO and it’s too thick for you just dilute it with more GSO.

 

[Jeffg353]

EQ does come as a liquid at room temperature.
It doesn’t actually require any BB so can go as low as u want with that. Really only need it to kind of thin the gear out. I use this steroid calc to get measurements…
https://www.steroidcal.com/oil_2

 

[Brochacho_Prime]

inb4 someone asks if you could just pin EQ raws through an 18g

 

[stergod]

Brochacho_Prime" pid='9546' dateline='1524604839:

inb4 someone asks if you could just pin EQ raws through an 18g

well…

 

[Jeffg353]

Yes but good luck. It’s not sterile #1 n it’s thick as fuck.