abletolift
New member
I see a lot of posts concerning the quality and dosage of orals etc. to be clear if they are caps not pressed tabs one can easily do water wash to remove the binder if it’s soluble most use creatine, baking soda, dextrose all three are water soluble most all aas is not which is why we brew them in oil. So if one were to take say 50 pills of 25mg anavar place the powder is a brown coffee filter most of the crystals are white makes it easier to see put it in a small basin dish. By pouring lukewarm water over it and sloshing it back and forth slightly the binder washes through the filter leaving the crystals on top. An easy way to tell if your getting fucked too. If you paid for 50*25mg of anavar do a water wash and are left with 600mg on your milligram scale wellllll… but if you have 1100-1250 you did okay to perfect for what you paid for. By the way by sloshing back and forth I don’t mean to make waves I mean leave in in the dish so the coffee filter bottom stays submerged in the water then gently pull it back and forth. When your done there should be no binder and in the case of anavar some sugarish looking Xtals. All AAS looks different so to experienced brewers most can tell the compound based on the actual shape and size of the xtals if not you can run either a labmax or roidtest on the compound. If creatine is used as the binder it is more challenging due to the fact only 1g per 75ml is soluble in water but can still be accomplished in smaller runs.
Last edited: