Thewhyoffry99
New member
- Joined
- Feb 22, 2018
- Messages
- 33
- Reaction score
- 0
Ordered 11/18
Sent in as a blind sample
Tested as oxandrolone @18.32mg in the capsule.
@“masters_gear”
Last edited:
When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.Only 70ish % var. That is some underdosed gear.
I’m not stressing it. I like orals in liquid more anyway unless they’re pharma.SmoothAnalBeadFartMaster" pid='31879' dateline='1543359409:
When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.Only 70ish % var. That is some underdosed gear.
One of the problems is using a filler that has the same molecular weight as the raws. If you have ever seen Clomid, Nolva, Dbol, Anavar raws you would understand. Some are like salt and some are a powder that vaporizes into the air very easily.
Anavar we use Creatine since its a bit heavier while we may use Casein protein for Clomid and Nolva.
This lack of accuracy is why we only do liquid solutions for AIs since the dosages are much smaller and far more important to get as accurate as possible. Imagine getting a dose of Adex that was 3mg instead of 1mg. I would be very suprised if this was not the case for other sources that are capping also. If anybody has a solution to this problem I am all ears. Otherwise this is just something we have to deal with. Some caps will be 18mg some caps will be 30mg.
Yep. I wouldn’t worry about a result like this at all with var in a capsule.SmoothAnalBeadFartMaster" pid='31879' dateline='1543359409:
When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.Only 70ish % var. That is some underdosed gear.
One of the problems is using a filler that has the same molecular weight as the raws. If you have ever seen Clomid, Nolva, Dbol, Anavar raws you would understand. Some are like salt and some are a powder that vaporizes into the air very easily.
Anavar we use Creatine since its a bit heavier while we may use Casein protein for Clomid and Nolva.
This lack of accuracy is why we only do liquid solutions for AIs since the dosages are much smaller and far more important to get as accurate as possible. Imagine getting a dose of Adex that was 3mg instead of 1mg. I would be very suprised if this was not the case for other sources that are capping also. If anybody has a solution to this problem I am all ears. Otherwise this is just something we have to deal with. Some caps will be 18mg some caps will be 30mg.
One partial solution is to use as little filler as possible. I notice a lot of people insist on using 00 capsules come hell or high water.When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.
One of the problems is using a filler
If anybody has a solution to this problem I am all ears.
I haven’t had a single source here (besides Sparta) use a 00 capsule.masters_gear" pid='31935' dateline='1543414331:
One partial solution is to use as little filler as possible. I notice a lot of people insist on using 00 capsules come hell or high water.When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.
One of the problems is using a filler
If anybody has a solution to this problem I am all ears.
Why would anyone use a 00 for a 25mg substance? It makes no sense. That’s what a size 3 is for. A 00 is made to hold an entire gram of powder. A GRAM! So when your pill is literally 98% filler, maybe make the pill smaller.
You reduce the margin for error tremendously when you reduce the amount of filler needed.
P.S. I’m aware Master is banned. I just wanted to bring this topic up because he’s far from the first person I’ve seen express this dilemma.
They use Size 4, the smallest size that is easy to get in large quantities. they make a size 5, but size 4 is so goddamn small, whats the point, plus they are annoying to buy.Nuts2Butts" pid='36333' dateline='1546826840:
I haven’t had a single source here (besides Sparta) use a 00 capsule.masters_gear" pid='31935' dateline='1543414331:
One partial solution is to use as little filler as possible. I notice a lot of people insist on using 00 capsules come hell or high water.When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.
One of the problems is using a filler
If anybody has a solution to this problem I am all ears.
Why would anyone use a 00 for a 25mg substance? It makes no sense. That’s what a size 3 is for. A 00 is made to hold an entire gram of powder. A GRAM! So when your pill is literally 98% filler, maybe make the pill smaller.
You reduce the margin for error tremendously when you reduce the amount of filler needed.
P.S. I’m aware Master is banned. I just wanted to bring this topic up because he’s far from the first person I’ve seen express this dilemma.
Checkmate and Sasquatch both use teeny tiny 0 size, or maybe even smaller (00 is the extent of my “expertise”)
But you make a good point bro!
Right on man, I figured they were much smaller than 0.Scuba Greaves" pid='36341' dateline='1546828982:
They use Size 4, the smallest size that is easy to get in large quantities. they make a size 5, but size 4 is so goddamn small, whats the point, plus they are annoying to buy.Nuts2Butts" pid='36333' dateline='1546826840:
I haven’t had a single source here (besides Sparta) use a 00 capsule.masters_gear" pid='31935' dateline='1543414331:
One partial solution is to use as little filler as possible. I notice a lot of people insist on using 00 capsules come hell or high water.When capping orals we do thousands at a time. We use a geometric dilution technique in order to spread the raws equally throughout the entire batch of caps. It is extremely difficult to do and be accurate.
One of the problems is using a filler
If anybody has a solution to this problem I am all ears.
Why would anyone use a 00 for a 25mg substance? It makes no sense. That’s what a size 3 is for. A 00 is made to hold an entire gram of powder. A GRAM! So when your pill is literally 98% filler, maybe make the pill smaller.
You reduce the margin for error tremendously when you reduce the amount of filler needed.
P.S. I’m aware Master is banned. I just wanted to bring this topic up because he’s far from the first person I’ve seen express this dilemma.
Checkmate and Sasquatch both use teeny tiny 0 size, or maybe even smaller (00 is the extent of my “expertise”)
But you make a good point bro!
That’s great and makes me more likely to use them in the future.Scuba Greaves" pid='36341' dateline='1546828982:
They use Size 4, the smallest size that is easy to get in large quantities. they make a size 5, but size 4 is so goddamn small, whats the point, plus they are annoying to buy.I haven’t had a single source here (besides Sparta) use a 00 capsule.
Checkmate and Sasquatch both use teeny tiny 0 size, or maybe even smaller
Interesting. I crashed my E2 3 freaking times over the last 5 months, with very little adex. I’ll be sticking to pharma adex for now.Brochacho_Prime" pid='36343' dateline='1546829509:
That’s great and makes me more likely to use them in the future.Scuba Greaves" pid='36341' dateline='1546828982:
They use Size 4, the smallest size that is easy to get in large quantities. they make a size 5, but size 4 is so goddamn small, whats the point, plus they are annoying to buy.I haven’t had a single source here (besides Sparta) use a 00 capsule.
Checkmate and Sasquatch both use teeny tiny 0 size, or maybe even smaller
I’ve only ordered pills from Versache and Hunter, and they both used either 00 or 0(I believe it was 00 but no way it was smaller than a 0). This was for anavar, winstrol, and accutane.
A size 4 is great. I would agree that any smaller can actually be difficult for a person to handle.
That super low active ingredient % is why I’m paranoid about buying UGL ADex while having zero concern about Ralox. A Ralox tab is about 50% filler and binding agent. While an ADex tab is about 99% filler and coating. It wouldn’t shock me if some ADex pills have 3x the active dose as other pills from the same batch.
Ralox and sz4 caps are amazing, because ~60mg of raw fills it up so you don’t have to dilute.Brochacho_Prime" pid='36343' dateline='1546829509:
That’s great and makes me more likely to use them in the future.Scuba Greaves" pid='36341' dateline='1546828982:
They use Size 4, the smallest size that is easy to get in large quantities. they make a size 5, but size 4 is so goddamn small, whats the point, plus they are annoying to buy.I haven’t had a single source here (besides Sparta) use a 00 capsule.
Checkmate and Sasquatch both use teeny tiny 0 size, or maybe even smaller
I’ve only ordered pills from Versache and Hunter, and they both used either 00 or 0(I believe it was 00 but no way it was smaller than a 0). This was for anavar, winstrol, and accutane.
A size 4 is great. I would agree that any smaller can actually be difficult for a person to handle.
That super low active ingredient % is why I’m paranoid about buying UGL ADex while having zero concern about Ralox. A Ralox tab is about 50% filler and binding agent. While an ADex tab is about 99% filler and coating. It wouldn’t shock me if some ADex pills have 3x the active dose as other pills from the same batch.