Miglyol 840 doesn’t seem so thin...

[sstaccount1]

I got a few bottles of a popular source’s Tren A in the 200mg/ml Mig840 variant.

Is the water-like viscosity not a realistic claim? My 28g insulin needles struggle to get it out of the bottle… literally no faster than they can draw mct. Only difference I can discern is the mct drawing somehow bubbles up in the slin pin whereas the mig runs down the barrel more smoothly.

Same experience with M840 test and m840 mast as well. I was expecting the experience to be more akin to drawing hcg.

Makes me wonder if I was shipped all mct oil bottles in the typical dosages. Labels say they are what I ordered though.

 

[sstaccount1]

SouthernCompounding" pid='18165' dateline='1530062188:

Since I’m the only source offering M840 these days, I’ll assume you made the purchase from us. I’ve never sold and never will sell MCT based oils so rest assured, you got what you purchased [shocker!].

I have no experience with MCT but by comparison, M840 is water when placed side by side with GSO. This might be the claim that you’re hearing. I don’t recall anyone giving anecdotal feedback between MCT/M840 when comparing viscosity, so I cannot offer any insight here. If you’re looking for an easier draw, I always recommend warming your oils prior to use. This will ease any PIP that you might incur through usage. And as always, make sure that you inject slowly to reduce PIP as well.

Enjoy your products!

Hey Southern, thanks for the reply man. It is your stuff haha (I hate starting witch hunts on unfounded claims)… I am by no means trying to bash ya.

I thought the other options were MCT, my mistake… Should have said GSO. My inj. mtren and inj. sdrol are both in MCT though, and I draw those with your Tren A, Mast P, and twice a week Test E (all Mig).

It literally is indiscernible though (all three of those vs the mct bottles), which is concerning considering your GSO and Mig bottles have the same color coding. For whatever reason I can’t get the qr codes to scan either.

I figure GSO is probably similar to MCT but I could be totally wrong here. If GSO actually is THICK compared to MCT, maybe Mig and MCT are more similar than I anticipated all is totally normal.

 

[system]

In all of my experience GSO is thick compared to MCT. MCT and mig have a very similar appearance and they are both much less viscous than GSO.

 

[Giantnerd11]

I only notice a slight difference between mct and mig, and the high concentration oils are thicker because there is so much hormone in there. For example soco’s Sdrol 50 in mig draws into a slin pin like water, the test e 400 is a decent amount slower.

 

[Trenbolognese]

sstaccount1" pid='18169' dateline='1530063364:

SouthernCompounding" pid='18165' dateline='1530062188:

Since I’m the only source offering M840 these days, I’ll assume you made the purchase from us. I’ve never sold and never will sell MCT based oils so rest assured, you got what you purchased [shocker!].

I have no experience with MCT but by comparison, M840 is water when placed side by side with GSO. This might be the claim that you’re hearing. I don’t recall anyone giving anecdotal feedback between MCT/M840 when comparing viscosity, so I cannot offer any insight here. If you’re looking for an easier draw, I always recommend warming your oils prior to use. This will ease any PIP that you might incur through usage. And as always, make sure that you inject slowly to reduce PIP as well.

Enjoy your products!

Hey Southern, thanks for the reply man. It is your stuff haha (I hate starting witch hunts on unfounded claims)… I am by no means trying to bash ya.

I thought the other options were MCT, my mistake… Should have said GSO. My inj. mtren and inj. sdrol are both in MCT though, and I draw those with your Tren A, Mast P, and twice a week Test E (all Mig).

It literally is indiscernible though (all three of those vs the mct bottles), which is concerning considering your GSO and Mig bottles have the same color coding. For whatever reason I can’t get the qr codes to scan either.

I figure GSO is probably similar to MCT but I could be totally wrong here. If GSO actually is THICK compared to MCT, maybe Mig and MCT are more similar than I anticipated all is totally normal.

Also, just as an fyi with being unable to scan the QR codes on SoCo’s goodies, I usually can’t read them straight on the bottle with my POS phone camera. I usually just have to peel one side off just a little bit until it is flat and not rounded on the vial then it works 100% of the time for me!

 

[sstaccount1]

Giantnerd11" pid='18185' dateline='1530070937:

I only notice a slight difference between mct and mig, and the high concentration oils are thicker because there is so much hormone in there. For example soco’s Sdrol 50 in mig draws into a slin pin like water, the test e 400 is a decent amount slower.

This! Yes, thank you.

I was wondering exactly this, if the high concentration thickened it or if 100 vs 200 mg/ml was so minute it wouldn’t even matter.

 

[DNPstoney]

sstaccount1" pid='18203' dateline='1530098256:

Giantnerd11" pid='18185' dateline='1530070937:

I only notice a slight difference between mct and mig, and the high concentration oils are thicker because there is so much hormone in there. For example soco’s Sdrol 50 in mig draws into a slin pin like water, the test e 400 is a decent amount slower.

This! Yes, thank you.

I was wondering exactly this, if the high concentration thickened it or if 100 vs 200 mg/ml was so minute it wouldn’t even matter.

I have some Test E 250 in M840, pins/pulls super quick. Significantly faster than GSO and MCT.

I also have some Tren E 300 in M840. It pins/pulls faster than GSO, and a little bit faster than MCT. It is a lot less noticeable than the Test E 250 though.