What's new
Steroid Source Talk

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Oil left in needle after injection

Aceraeon

New member
Just wondering if there is anything i can do to not have to waste the little bit of fluid left in the needle after injection. I heard of someone dripping it onto their skin and treating it like androgel. would this work or is it completely stupid. ??

Is there a better a better option? I really don’t want to just chuck it out.
 
Last edited:

Dexter

New member
There are 1cc syringes that have a rubber stopper on the plunger that go deeper into where the needle screws on. I have them, but I don’t like using them because I prefer 3ml syringes that are easier to hold steady.

You can leave an air bubble to clear the needle, however, we often inject from weird angles and the bubble ends up not at the rubber end of the plunger so it doesn’t do any good when it comes to clearing out the last of the oil.
 
Last edited:

Giantnerd11

New member
It’s a tiny bit of oil, but if you really want to get everything use slin pins. Next to nothing is left in a slin pin after injection.
 
Last edited:
S

system

Guest
Haven’t had this issue in years. Simply get an air bubble @ the top of your syringe (which replaces the oil that would otherwise be left) and you’ll hear a slight suction noise from your syringe when your injection finishes (even if you don’t it doesn’t matter just as long as you had an air bubb @ the top). Works totally fine in delts, bis, tris, glutes and quads.
 
When you pull oil into syringe and you adjust the plunger so that the oil is close to the needle before you pin, leave like thin line of air. This will definitely work more so if you aspirate.

If there’s still oil shoot it into your mouth or just toss it.

Does it have any impact shooting a tiny droplet of oil into your mouth? Nah. I’m just a freak and love the taste of god jooce.
 
Last edited:

josht9210

New member
illmortalized" pid='73217' dateline='1572218834:
When you pull oil into syringe and you adjust the plunger so that the oil is close to the needle before you pin, leave like thin line of air. This will definitely work more so if you aspirate.

If there’s still oil shoot it into your mouth or just toss it.

Does it have any impact shooting a tiny droplet of oil into your mouth? Nah. I’m just a freak and love the taste of god jooce.
This is when you know you’ve left humanity behind.
 
Last edited:

Aceraeon

New member
Thanks for the info guys. I am going to try the air bubble method. Im not to sure I want to eat steroid oil. fwiw I rubbed the 0.1-ish left in one of my syringes into my skin and got a bit of a headache an hour later that lasted for 12ish hours. I would advise against doing this.
 
Last edited:

thallandchill

New member
Aceraeon" pid='73354' dateline='1572367463:
Thanks for the info guys. I am going to try the air bubble method. Im not to sure I want to eat steroid oil. fwiw I rubbed the 0.1-ish left in one of my syringes into my skin and got a bit of a headache an hour later that lasted for 12ish hours. I would advise against doing this.
Best thing to do is to use it like a dropper and drop the oil into your eye ball. It absorbs quick and improved your vision gains.

Tren gives the best vision gains using this method, btw.
 
Last edited:

mdwilson2011

New member
Dexter" pid='73142' dateline='1572119835:
There are 1cc syringes that have a rubber stopper on the plunger that go deeper into where the needle screws on. I have them, but I don’t like using them because I prefer 3ml syringes that are easier to hold steady.

You can leave an air bubble to clear the needle, however, we often inject from weird angles and the bubble ends up not at the rubber end of the plunger so it doesn’t do any good when it comes to clearing out the last of the oil.
Ive never had a problem with this injecting pecs, delts, vg, and glute max. If you’re parallel or slightly above parallel to to floor, you should be fine with the air bubble method.
 
Last edited:
Giantnerd11" pid='73145' dateline='1572122419:
It’s a tiny bit of oil, but if you really want to get everything use slin pins. Next to nothing is left in a slin pin after injection.
This is the right answer unless you are fat. You should be able to use a half inch slin pin anywhere but your glutes.
 
Last edited:
Top