Pinning 3 compounds at once

[That Guy]

I did a search and didn't find anything.

If someone is using 3 compounds at fairly low doses (200mg total) and all 3 have the same carrier oil, is it ok to use 1 syringe for all 3 at once? Or best to do 1 for each?

I apologize if it's a stupid question. Better safe than sorry.

Thank you

 

[MuscleMongoose]

Depends on the individual mate. Some like to preload them all in one and then inject.

Me personally I like to do separate.

 

[Case-Akilleez]

I did a search and didn't find anything.

If someone is using 3 compounds at fairly low doses (200mg total) and all 3 have the same carrier oil, is it ok to use 1 syringe for all 3 at once? Or best to do 1 for each?

I apologize if it's a stupid question. Better safe than sorry.

Thank you

Absolutely you can combine them

 

[Gbunk]

It’s fine to combine them man. What you don’t want to do would be mix something like a water suspension and oil I think.

 

[dick_starbuck]

You can absolutely mix any and all oil based inj in the same syringe. If it's GSO and MCT for another they will mix in the syringe. No big deal. I personally pin 7x a week with 1cc leur lock slin pin. I mix what I'm running and distribute my weekly dosage across seven days. They all mix together just fine without issue.

 

[That Guy]

You can absolutely mix any and all oil based inj in the same syringe. If it's GSO and MCT for another they will mix in the syringe. No big deal. I personally pin 7x a week with 1cc leur lock slin pin. I mix what I'm running and distribute my weekly dosage across seven days. They all mix together just fine without issue.

When you say you mix and then distribute... Do you mean you use 1 syringe to pull more than 1 compound for each day or do you mix 7 days worth and then full 7 syringes? If so, what do you mix them in?

I'm just looking for a simpler way than to measure out the 3 compounds in 1 syringe each time. If that's my only choice, so be it.

 

[dick_starbuck]

When you say you mix and then distribute... Do you mean you use 1 syringe to pull more than 1 compound for each day or do you mix 7 days worth and then full 7 syringes? If so, what do you mix them in?

I'm just looking for a simpler way than to measure out the 3 compounds in 1 syringe each time. If that's my only choice, so be it.

Currently I am taking .3cc of test e 250 a day, and .4cc of mast e 200 everyday, mixed in one syringe. 525mg test e, 560mg mast e weekly, distributed across seven days.

First I draw from one vial, and the other. Then injected. I don't think there is a more straight forward way to do it.

 

[That Guy]

Don't know how sterile the following would be since I'm not an expert. Using an empty bottle that once had test in it and inject in whatever mixture according to amounts into that vial. Then when injecting, you're withdrawing from 1 vial instead of 2 or 3.

Edit: for example putting in 5cc of test and 2.5cc of Deca & 2.5cc of primo into a used bottle and then pulling from that one since it's mixed.

 

[dick_starbuck]

Don't know how sterile the following would be since I'm not an expert. Using an empty bottle that once had test in it and inject in whatever mixture according to amounts into that vial. Then when injecting, you're withdrawing from 1 vial instead of 2 or 3.

Edit: for example putting in 5cc of test and 2.5cc of Deca & 2.5cc of primo into a used bottle and then pulling from that one since it's mixed.

You can do this. You can buy sterile vials off many medical supply sites.

 

[rastaman69]

I've been injecting test c and deca together, both in grapeseed oil. It's new to me so a little tricky. I'm running 500/300 per week, MWF. As luck would have it, that's exactly 1ml per day. 0.67ml test and 0.33ml deca with the concentrations I'm running.

I first inject a bunch of air into my test vial, and draw .67ml. Then I draw .33 of deca but I don't inject air into the deca vial. I don't want to accidently squirt test into it. I figure drawing deca last means fighting less vacuum because of less volume.

Luckily the 1ml syringes can hold more, I draw back past 1ml, until the needle is empty, swap needles, purge air, and inject.