[Source] ~HYPERTROPHY~ Now accepting XMR

[TigolBitties]

If I ever come onto a steroid forum and complain about "PiP" ... pull my fucking gear card. Seriously...

If I ever come onto a steroid forum and bitch about pip, please just help me pull the trigger. Because at that point I'm too far gone to come back from. Just put me out of my misery, I beg of you

 

[TigolBitties]

Hello Hypertrophy, yes I am pinning Test E 300 on my glute using a 1.5 inch 23g needle twice a week. The PIP is gone after about 3 days but it was pretty bad initially when I switched over from using Test C 200.

It's test e brewed at 300mg/mL. High concentration on top of a compound that many people cry about pip from. That's your answer. It's not his gear that is the problem. I hear there is a cream you can rub on that and it really helps, I believe it's called vagisil.... All jokes aside, I gave you the answer. Dilute it down with other compounds or dilute it with sterile oil. Warm the oil before you pin it. If that doesn't work I think you just need to nut up.

 

[203_Aesthetics]

Pin size is important too. I use 1”, 25 gauge. A little slower to inject, but worth it.

harpoons!! i been using .5 30g for trt volume shots. Will probably opt for daily injections on blast and keep volume at or under .5ml daily

 

[203_Aesthetics]

Hello Hypertrophy, yes I am pinning Test E 300 on my glute using a 1.5 inch 23g needle twice a week. The PIP is gone after about 3 days but it was pretty bad initially when I switched over from using Test C 200.

switch to cyp

 

[Senderson]

quick noob question if someone wouldn't mind answering:
i've only ordered from sources that had websites in the past, so is this the process for ordering here?
-email what i want including total price with shipping, then if i did that correct he responds back with an address to sent btc to. then once i send it do i get a confirmation that the payment recieved? next stop gains?

 

[Hypertrophy]

Hello Hypertrophy, yes I am pinning Test E 300 on my glute using a 1.5 inch 23g needle twice a week. The PIP is gone after about 3 days but it was pretty bad initially when I switched over from using Test C 200.

Ouch!!! Are we hunting whales or? That is a harpoon size needle and could be why your having such bad post injection pain. Also, using this size needle is causing a great deal of scar tissue buildup that would also contribute to some discomfort. The viscosity level of MCT oil is very thin and will flow thru a 25g-27g needle very nicely. I personally use a 27g 1/2 needle for all my injections and a 23g as a draw pin. I highly recommend using no bigger than 25g 1" needle.

 

[Hypertrophy]

Any 2024 testing coming soon?

Yes, I will be sending out product for testing very soon!

 

[Hypertrophy]

Solid, Solid, SOLID, supplier. I just placed my 4th order with 3 emails complimenting his work. His test C has amazing and keeping me really even on TRT, and honestly I should post bloods. Thanks again hyper. I hope this masteron order helps me lean out for summer! Thank you again!

Just placed an order for Masteron P x3 to the midwest .....ill get back to the forum on shipping time from today, my last shipment took 4 days total.

Thank you again Hyper! I ordered some test cyp x4 (last shipment) and honestly? Best Best BEST vials i've gotten.

Thank you again for the awesome packaging too, and 3 day shipping. I appreciate it. ^_^. Absolutely clutch asf for a summer cycle. and Im looking forward to this one

Gotta love Hyp! Needed a couple things in a pinch and thanks to no order minimum he was able to hook me up. Secretly I just wanted more stickers though.

I would like to add that I tried some expensive test from a different website and didn't feel like it was really doing much. I had two vials of Test-E 300 from Hypertrophy left over and jabbed 1.5cc and definitely feel the difference. Will be ordering some test soon!

Thank you all for the positive reviews! I work incredibly hard to put out a solid, consistent product so seeing these makes me very happy

 

[Johnnyloko1]

Hey do you have the product testing done for your 6th batch of dianabol 50mg? Thanks

 

[Hypertrophy]

Hey do you have the product testing done for your 6th batch of dianabol 50mg? Thanks

Hello, I don't believe testing was performed on batch 0006, if so, it would have been posted on the first page. However, all my oral compounds receive a very generous 10% overdose of active ingredient during the production process. Feel free to email if you have any other questions!

 

[AlexDavis43]

Pin size is important too. I use 1”, 25 gauge. A little slower to inject, but worth it.

Sure pin size is important for some. I use 23 and haven't had bad pip in forever.

I don't think there's an obvious single cause of PIP. Poor injection technique? Subpar gear? Carrier oil & solvents? Bad luck that day??

 

[AlexDavis43]

Any 2024 testing coming soon?

As soon as you send some in for testing.

 

[AlexDavis43]

Ouch!!! Are we hunting whales or? That is a harpoon size needle and could be why your having such bad post injection pain. Also, using this size needle is causing a great deal of scar tissue buildup that would also contribute to some discomfort. The viscosity level of MCT oil is very thin and will flow thru a 25g-27g needle very nicely. I personally use a 27g 1/2 needle for all my injections and a 23g as a draw pin. I highly recommend using no bigger than 25g 1" needle.

To each their own?

I've been using 23 gauge in my quads twice a week for years.

Maybe susceptibility to scar tissue and PIP are on the individual level? I don't have any scar tissue and haven't had bad PIP in recent memory. Knock on wood.

 

[Danielb55]

It's test e brewed at 300mg/mL. High concentration on top of a compound that many people cry about pip from. That's your answer. It's not his gear that is the problem. I hear there is a cream you can rub on that and it really helps, I believe it's called vagisil.... All jokes aside, I gave you the answer. Dilute it down with other compounds or dilute it with sterile oil. Warm the oil before you pin it. If that doesn't work I think you just need to nut up.

To each their own?

I've been using 23 gauge in my quads twice a week for years.

Maybe susceptibility to scar tissue and PIP are on the individual level? I don't have any scar tissue and haven't had bad PIP in recent memory. Knock on wood.

I would question how much he moves the needle around while pinning. Especially a gigantic 23g. I havent used those in 10yrs. I will calculate the necessary doses of each product and consolidate them into a new vial, then pen myself everyday with 29g.
300mg test isn't bad for concentration. It isn't Ment!

 

[Danielb55]

quick noob question if someone wouldn't mind answering:
i've only ordered from sources that had websites in the past, so is this the process for ordering here?
-email what i want including total price with shipping, then if i did that correct he responds back with an address to sent btc to. then once i send it do i get a confirmation that the payment recieved? next stop gains?

Go to first page

 

[Danielb55]

Ha

Sure pin size is important for some. I use 23 and haven't had bad pip in forever.

I don't think there's an obvious single cause of PIP. Poor injection technique? Subpar gear? Carrier oil & solvents? Bad luck that day??

Have you ever used MENT?

 

[Danielb55]

switch to cyp

For one, don't inject quickly! That Is the first cause of PIP.Second, make sure you don't move the pen around while injecting. Third, you're using newb size needles. You use those for IV, not to do intramuscular. That is why when you get your shots from the doc they hurt so bad. They shove large needle in, and inject the fluid quickly. I mix my gear, and do daily shots with a 29g. You can do 27g too. I would rather do 2 shots a day with 29g than 23 1 1/2. I use .5 inch long just fine. Less fluid, the smaller the needle needs to be.

 

[M312]

Just placed for first order !!
Heard his Primo is g2g ..anyone else running ot...looking forward to landing

 

[PartiesOver28]

Shot you an email brother! Looks like everyone has nothing but good things to say about you.

 

[PartiesOver28]

Waiting on the confirmation brother! Thanks