Preferred needle size?

[Fordtough]

Does it matter what size depending on the type of steroid ? Or

 

[propionate]

25g 1” to inject

What matters is the carrier oil, but with a 25g it doesn’t matter what oil is used. If you get to smaller sizes then the carrier oil can make injections take a long time

If you’re using a 1cc barrel then the oil doesn’t matter up to 27-29g but drawing will still take awhile if you don’t use a drawing needle.

 

[MiniFridge]

I draw with a 22g, pin glutes with 25g 1.5" and delts/chest with 25g 1". Peptides and HGH with an insulin syringe.

 

[Harbenger]

I’m in the 1" 25g group also for quads or glutes with some 5/8 25g for chest and delts.
18g, 19g and 20g "1.5 on hand to draw depending on the stopper, IMO some stoppers aren’t as durable as others.

 

[yelruP]

25g to draw 27g 1 1/4” to inject everywhere

Y’all gonna core your vials using big ass drawing needles it’s not necessary

 

[md269]

I draw with 18g from the ampoule and backload a 29g 0.5-inch syringe for injection.

 

[nobenchrichy]

Draw with 23 gauge 1 inch
Pin with 25 gauge 1 inch (everywhere: glutes, VG, lats, delts, chest)

 

[T&H]

Used 25 and 27, prefer 27ga.

 

[system]

25g is the biggest

31g is the smallest

1/2" or 5/8" for every site other than glutes (not vg) which I use a 1 1/4"

21-25g to draw, any length. typically 22 or 23g but i’ve had to use 21s because that’s all the pharmacy had and same with 25s. ideally the smaller you can draw with, the better (as purley mentioned above, the bigger size you use to draw the more likely you are to get floaters/chunks of stoppers in your vial)

 

[thallandchill]

I use a 20ga to draw, should probably use smaller but it’s what I have at the moment. I use a 25ga 1 1/2" for every injection site. Bout to start hitting my traps but definitely not gonna use a needle that big for that.

 

[Fordtough]

Nice guys thanks I appreciate . I was drawing up and blew past me that should use a draw needle then the one to inject. Helps out alot

 

[ForceAndFinesse91]

i use a turkey baster, just file the end down to a fine point dip that punk in ethanol pick a spot on my quad then grab the back of the baster by both hands and give it a real good push!
Dont understand why its not a popular thing yet…
Never have to worry about hitting a vein when you your shits so dull by the time its in the muscle its not cutting into anything

 

[ReamusLQ]

29g slin pins for everything. All my injectibles are made with Mig, so it flows like water, and you can draw and inject with the same. Zero PIP. Never go back to a 25g harpoon again.

 

[egoliftlowbench]

ReamusLQ" pid='65105' dateline='1565908180:

29g slin pins for everything. All my injectibles are made with Mig, so it flows like water, and you can draw and inject with the same. Zero PIP. Never go back to a 25g harpoon again.

are you like 2% bf? I wish I could do that, 25g in the booty no PIP ever for me, but Im semi thicc. If you think 25g is a harpoon you should see the DYELs that go on cycle and pin with a 22 lol

@OP If you have no issues with it 25g 1 inch should be perfect. Draw with an 18g so it is fast and pin with 25 or slin pin I guess like other guy said. Ive not done it so I cannot attest but it obviously works for most people seeing as its much smaller of a needle

 

[thallandchill]

I pin with a 25 ga 1-1/2" needle everywhere. Bury that shit to the hilt even in my delts.

 

[ReamusLQ]

egoliftlowbench" pid='65111' dateline='1565910712:

ReamusLQ" pid='65105' dateline='1565908180:

29g slin pins for everything. All my injectibles are made with Mig, so it flows like water, and you can draw and inject with the same. Zero PIP. Never go back to a 25g harpoon again.

are you like 2% bf? I wish I could do that, 25g in the booty no PIP ever for me, but Im semi thicc. If you think 25g is a harpoon you should see the DYELs that go on cycle and pin with a 22 lol

@OP If you have no issues with it 25g 1 inch should be perfect. Draw with an 18g so it is fast and pin with 25 or slin pin I guess like other guy said. Ive not done it so I cannot attest but it obviously works for most people seeing as its much smaller of a needle

Definitely not, I just don’t pin my glutes and carry most of my fat in my abdominal area. Delts, lats, pecs, quads, calves, all get pinned with a 29g slin pin, and I’ve never had a leak.

 

[Cog_Noggin]

I’m happy injecting with 25 gauge 1.5" for glutes. Easy and painless. I draw with a 22 1" needle, since I’m worried about coring my stopper with anything much bigger than that. Regardless, drawing oil doesn’t take too long with that size for me.

 

[mdwilson2011]

thallandchill" pid='65118' dateline='1565913667:

I pin with a 25 ga 1-1/2" needle everywhere. Bury that shit to the hilt even in my delts.

Jesus christ. You’re an animal

 

[blvck.scvle]

25gx1.5" in my booty.

 

[mdwilson2011]

30g 1/2" everywhere except glute max. For glute max I cut the cap on a 27g 1" needle to make it about 3/4"